High
current test probes designed for varied used in electronic
industries for applications use high currents, such as testing, function test,
signal transmission, and high power
supply. A high current test probe allows ordinary
appliances to size the
voltages that would else be too high to measure or even critical. There are
many test probes, the category os these probes
are basically concentrated on the amount of voltage
carried by a test probe. The high current test probe comes in multiple designs
and head shapes, the ordinary is a fundamental probe for testing high currents.
Typical and traditional probes are rated from 2to8 amps at current working
level. Some higher current applications require vast power to run smoothly,
these high current test probes are more solid and rugged and can withstand with
high voltage capabilities of 10to150 amps and beyond. Here in this blog, we
have listed some different current test probes that are available at http://www.equip-test.com/
 |
| high current test probes |
Standard high current test probes - These test probes are available in varies
designs and tip styles with different diameters. In addition, a choice of
spring force at the collar of the tip for installation is available in varied
applications.
Less Stroke Test Probe – These high current test probes are
suitable for the applications that have limited space. In standard probes many
attaching options are available. Hence, short stroke test probes limit its
access.
High stroke Test Probe – best high current test probes for
communicating applications which require a long stroke.
Robust Current Test Probes – are used in challenging environmental
conditions, the probes are suitable as a permanently assembled contact
elementary in appliances.
International Probes – high current test probes without a front
tip. installation of such probes is been adjusted using the holder.
Additional Features HIGH CURRENT TEST PROBES
All the high current test
probes contain earthing to the circuit reference voltage. A short ponytail wire
has connected the probe from head to ground. These probes allow a variety of
tips to be installed. The tips which come with the small plastic insulating
foot with hollows in the probes can make a fine pitch integrated circuits.
To mount the high current test
probes various options are available. These probes can either be pressed or
screwed in the holder. Attaching without holder is also possible. Applications
with shaking and vibrations use screw in probes.
Equip Test serves high-quality
Current Test Probes while giving full support to customers with installation
and services. For more information, please contact us at info@equip-test.com
No comments:
Post a Comment